Why Slight Shaking – Due different car rear windows have different radians, so the special designed for the slight shaking between the metal tube that fits inside the suction device to make the suction cup better fit the angle of the glass automatically subsequently to succeed in the best suction effect.
70° or 90° Angle Adjustable – Install the nuts into the corresponding holes at 70° or 90°, so you’ll adjust the bracket’s angle to accommodate car rear windows with different inclinations. Perfect for loading kayaks to most kinds of cars or jeeps.
Safety Red Line Indicator – There is a warning line on suction cup as a protected-installation indicator, permanently monitoring its vacuum state and thus its holding strength. If the red cordon rises and the red line becomes visible, the kayak roller suction cup will have to be released and newly fastened. The red line indicator of the kayak loader suction cup will be invisible when a protected and protected hold is achieved.
Load up to 150 LBS – Hold the kayak loader assist system to the car back window by the use of the 2 heavy-duty suction cups, combined with aluminum bars, load up to 150 lbs.
Hourglass Roller – 21.8 inch width U-shaped bracket, kayaks would possibly not slide out all the way through loading. The distance between the two suction cups of hourglass shaped rollers is closer, the difference in curvature of the plane is smaller, and it is less likely to fall off
V-shape Rotating Foam – When the kayak comes down, the V-shape rolling resistance will make it slip slower thereby keeping the kayak protected. With 3.26-inch thickness foam pad to offer protection to the hull all the way through loading and prevent scratches and damage.
Clean the Window Before Use – For greater suction contact, clean the rear windshield surface with the towel before installation, then press two suction cups. make sure the boat roller is protected before use, and load the kayak to the car top.
[amz_corss_sell asin=”B0CTJMC514″]
Reviews
There are no reviews yet.