TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; to be used above the waterline on fiberglass, wood, gelcoat and prior to now painted surfaces in good condition
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the outside with 1 thin coat; apply a second coat provided that a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 ” solvent-protected foam roller, or to spray, use a 1.1mm tip; wear correct personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Able to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application – thin with TotalBoat Special Brushing Thinner 100; spray application – thin with xylene; don’t apply Topside Primer thicker than advisable or it would possibly not cure properly
[amz_corss_sell asin=”B0B8BM8B2R”]